Captain 6 Installation Guide
15
2.7.4
TELEPHONE
Diagram 11.
Telephone wiring
Connect the telephone line wires TELEPHONE LINE terminals.
Use the SET terminals to connect other telephone sets, fax or answering machine to the
SET terminals.
This setup enables the control panel to disconnect the SET terminals and make a phone
call, when an alarm is set off or a fault occurs.
2.7.4.1
The system dialer
The CAPTAIN 6 includes a dialer for calling the Monitoring Station and the end user, via
PSTN or GSM networks.
The dialer first calls the Monitoring Station (if you are a subscriber), then the end user;
each number is called twice and a synthesized alarm or voice message (if a VU-20 voice
unit is in use) is sounded.
The dialer terminates the calling cycle in the following circumstances:
The system is disarmed;
All calls were completed (2 calls per number).
2.8
TRANSMITTER
Diagram 12.
Radio transmitter wiring
Line-in
LINE
TELEPHONE
S ET
DIO
IN
EGND
Line-out
TRV/TRU-100
Control Panel
To the
System
F2 Program
TRANSMITTER
2
nd
channel trigger.
Connects to a
triggering output
1
Molex female
connectors
harness
