Safety
Operating Manual PSSu E F ABS SSI(-T)
1001455-EN-09
11
– Offset
To avoid errors during a simultaneous counter overflow, one of the absolute en-
coders must be equipped with an offset.
}
If more than two counters are used, each individual counter module of a PSSu system
must supply diverse input values to the other counter modules of the PSSu system.
}
Safe standstill monitoring must be carried out by feasibility with a safe travel command
in the function block.
}
Test the safety functions when commissioning or recommissioning.
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
}
Any component, technical or electrical modification to the module
}
Use of the module outside the areas described in this manual
}
Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by PAS4000 from Version 1.1.1. We recommend
that you always use the latest version (download from www.pilz.de).
The PSSu E F ABS SSI module may be used in conjunction with the following base mod-
ules:
}
PSSu BP 1/8 S
}
PSSu BP 1/8 C
}
PSSu BP-C 1/8 S
}
PSSu BP-C 1/8 C
}
PSSu BP 1/12 S
}
PSSu BP 1/12 C
}
PSSu BP-C1 1/12 S
}
PSSu BP-C1 1/12 C
The module PSSu E F ABS SSI-T may be used in conjunction with the following base mod-
ules:
}
PSSu BP 1/8 S-T
}
PSSu BP 1/8 C-T
}
PSSu BP-C 1/8 S-T
}
PSSu BP-C 1/8 C-T
}
PSSu BP 1/12 S-T
}
PSSu BP 1/12 C-T
}
PSSu BP-C1 1/12 S-T
}
PSSu BP-C1 1/12 C-T
