Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1
Intended use
3
Safety
3
3000
Safety
Safety
3-
3.1
Intended use
3100
Intended use
3-
][Gerätebeschreibung FS-Module Sys A + B
The module may be used for failsafe applications in system environment
A and B (automation system PSS 4000).
Bestimmung/Gerätebeschreibung Kat./SIL_PSSu
The module meets the requirements of EN IEC 61508 up to SIL3 and
EN 954-1 up to Category 4.
][Gertebeschreibung FS-Eingang
It provides type 1 failsafe inputs in accordance with IEC 61131-2.
Bestimm_Verwend_Zusatz-(T)
The module PSSu E F 4DI-T is suitable for use where there are in-
creased environmental requirements (see Technical Details).
Bestimm_Verwend_Zusatz-(R)
The module PSSu E F 4DI-R is suitable for use where there are in-
creased environmental requirements demanded by railway applications
(see Technical Details).
Bestimmung/Gertebeschreibung_Ausschluss
Intended use includes making the electrical installation EMC-compliant.
Please refer to the guidelines stated in the "PSSuniversal Installation
Manual". The module is designed for use in an industrial environment. It
is not suitable for use in a domestic environment, as this can lead to in-
terference.
The following is deemed improper use in particular:
Any component, technical or electrical modification to the module
Use of the module outside the areas described in this manual
Use of the module outside the technical details (see chapter entitled
"Technical Details")
Bestimm_Verwend_Info_PSSu_PAS4000_mit-R
Bestimm_Verwend_Basismodule
INFORMATION
The module is supported by
PSSuniversal Configurator and PSSuniversal Assistant from
Version 1.4.0 (base type, T-type)
PAS4000 from Version 1.1.1 (base type, T-type)
PAS4000 from Version 1.5.0 (R-type)
– We recommend that you always use the latest version
(download from www.pilz.de).
