Installation
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 50
5
Installation
5.1
General requirements
Please note for installation:
}
The PSENvip may only be installed by qualified personnel.
}
The environmental data for the PSENvip must be taken into account. Details are avail-
able in the chapter entitled “Technical Details”.
}
The transmitter and receiver should be installed with the respective front lenses aligned in
parallel to each other.
}
The distance between the transmitter and receiver may not be greater than the value
stated in the "Technical Details".
CAUTION!
Ensure that the field of vision of the front lenses on the transmitter and re-
ceiver is not restricted. Do not attach any other optical elements such as
glass/plastic surfaces, films or lenses.
– Check the fastening of the PSENvip at regular intervals.
– Check that the fastening of the PSENvip is not accidentally working
its way loose as a result of vibration from the press brake.
