Pilz PSEN opII4H Series, Operating Manual, Page: 6 / 57

PSEN opII4H Series
Operating Manual PSEN opII4H Series
1003501-EN-02
6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Safety light grids in the PSEN opII4H Series constitute electrosensitive protective equip-
ment (ESPE type: 4) in accordance with DIN EN 61496-1 and DIN EN 61496-2 (AOPD) for
workspaces in which machines, robots, and automated systems might pose a physical
danger to their operators.
Unit features
} Resolution: 30 mm
}
Infrared protected field is generated
}
LED indicator for status information
}
Optical synchronisation of transmitters and receivers
}
Connection to evaluation devices
– PDP67 ION and PDP67 ION HP: 5-pin M12 two-sided connector (see Order refer-
ence for accessories, connection to PDP67 [ 52] )
– all other suitable evaluation devices (see System connection [ 32] ): 5-pin M12
one-sided connector and open cable end connection to clamping sleeves (see Or-
der reference for accessories, connection to other evaluation devices [ 53] )
}
Aluminium alloy housing
}
Die-cast zinc end caps
}
Shock resistance
– Bracket Swivel-Mount: 10g
– Bracket Adv Bracket Kit: 50g
}
Front panel of PC
}
Standard installation kit with flexible bracket (swivel mount) (included in delivery) to hold
the transmitter/receiver
– For standard application
– Transmitter/receiver remains rotatable for proper orientation
}
Dead-zone-free safety light grid installation [ 22] with the
PSEN opII Adv Bracket Kit (available as an accessory [ 51] ) as a bracket for a
transmitter/receiver
– Dead-zone-free on both sides for protected field height of 300 mm or more
– Dead-zone-free on one side for protected field height of 150 mm
– Transmitter/receiver remains rotatable for proper orientation
– Protected field heights of 150-600 mm, including: 1 PSEN opII Adv Bracket Kit-2
(=2 clamping units per transmitter and receiver)