PNOZ X9P
Operating Manual PNOZ X9P
1003362-EN-12
| 11
Timing diagram
Out semi OUT
Out semi ON
[2]
[3]
[1]
Legend
}
Power: Supply voltage
}
Start: Start circuit
}
Input: Input circuit
}
Output safe: Safety contacts
}
Output aux: Auxiliary contacts
}
Out semi ON: Semiconductor output supply voltage
}
Out semi OUT: Semiconductor output switch state
}
[1]: Automatic start
}
[2]: Manual start
}
[3]: Monitored start
}
a: Input circuit closes before start circuit
}
b: Start circuit closes before input circuit
}
t
1
: Switch-on delay
}
t
2
: Delay-on de-energisation
}
t
3
: Recovery time
Installation
}
The unit should be installed in a control cabinet with a protection type of at least IP54.
}
Use the notch on the rear of the unit to attach it to a DIN rail (35 mm).
}
When installed vertically: Secure the unit by using a fixing element (e.g. retaining bracket
or end angle).
