PIT si1.1
Operating Manual PIT si1.1
21040EN03
7
Wiring
CAUTION!
Wire the lamp when it is isolated from the power supply.
}
Perforate the stuffing box using a screwdriver.
}
The power supply is fastened underneath the bulb holder with the aid of the two screw
terminals. Press the terminals beside lamp holder to the side and push the wire into the
cutouts above the holder.
2 cores
Fig.: Wiring
Installation
}
Install the base directly on a horizontal surface or on the fastening bracket using the
two screws supplied.
}
Install the fastening bracket with the base on a vertical surface.
Fig.: Installation
