PIT es6/PIT esb6
Operating instructions PIT es6/PIT esb6
22138-EN-06
7
Surface mount housing
[1]
[2]
[3]
Legend:
}
[1]: Actuator
}
[2]: Plastic nut
}
[3]: Contact block with flat connector
Installation
CAUTION!
The pushbutton should always be installed with the supply voltage switched
off.
Panel mount version
NOTICE
Use a mounting plate with a smooth surface to ensure a tight seal.
}
Prepare another opening in the mounting plate (see diagram).
}
Guide the thread of the E-STOP pushbutton into the mounting plate opening and se-
cure it using the plastic nut (size 24 spanner). Note the max. torque setting of 1.5 Nm.
