PSEN opII4B Series
Operating Manual PSEN opII4B Series
1005005-EN-02
| 24
Prepare the installation surface.
Clean the installation surface. The installation surface must be free of dust and grease.
[1]
[1]
[2]
Mount the holder on the end cap on the connec-
tion side of the safety light curtain
Feed the cable [2] through the opening in the holder.
Ensure that the holder is flush with the end cap (see
diagram).
Attach the holder to the end cap with the tightening
screws (Torx T10) included in delivery.
[1] Torque setting 0,7 Nm
[1]
[1]
Mount the holder on the end cap on the wiring side
of the safety light curtain
Ensure that the holder is flush with the end cap (see
diagram).
Attach the holder to the end cap with the tightening
screws included in delivery.
[1] Torque setting 0,7 Nm