PSEN ma1.3p-22
Operating Manual PSEN ma1.3p-22
22148-EN-05
| 18
Attach the actuator using 2 M12 hexagonal
nuts with special threads.
Note the max. torque setting (see
Technical
details [
21]
).
Installation with actuator PSEN ma1.3-12
Attach the bracket using countersunk
screws (M4).
Sensing face
The sensing face at the actuator is marked
by a circle with a bevelled surface in the
shape of the safety switch. The sensing
face can be aligned in 3 directions depend-
ing on the direction of actuation. Slide the
actuator on to the bracket in the required
direction of actuation until the actuator clicks
into place.
The actuator should be secured using a set
screw M3 x 6 mm DIN 319 (supplied with
the device).
Also note the low max. torque setting (see
Technical details [
21]
).
Adjustment
}
The safety switch may only be used with the corresponding actuator PSEN ma1.3-08 or
PSEN ma1.3-12.
}
Always test the function with the PSEN ix1 interface and connected evaluation device.
