Contents:
Dear customer,
thank you for purchasing our product. We wish you a lot of success with it in your business. Please pay close attention to
the following instructions in order to ensure faultless operation of the machine.
© 2018
All rights, particularly the right to make copies of, to distribute and translate this instruction manual, are
reserved. No part of this instruction manual may in any form (printing, copying, microfilm or other means) be reproduced
or stored, processed, copied or distributed using electronic systems without a permission by PILOUS.
ver. 1/12/2018
ORIGINAL INSTRUCTION MANUAL
0. General
0.1. Safety Provisions
0.2. Scope of Use / Use According to Designation
0.3. Requirements on Operators
0.4. Machine Requirements - Safety Devices
0.5. Protective Covers
1. Transport and Storage
1.1. Surface Protection
1.2. Packing
1.3. Disassembly/Repacking Disposal
1.4. Disposal
2. Technical Data
3. Installation
3.1. Space Requirements
3.2. Removal of Temporary Transport Beams and
Fixation of the Machine
3.3. Machine Installation
3.4. Connection to the Mains
3.5. Nameplate
4. Machine Description
4.1. Control Panel
4.2. Control Valve - Saw Blade Feed to the Cut
4.3. Vice
4.3.1. Adjustment Procedure - Lateral Play of the Vice
4.3.2. Cutting Angle Settings
4.4. Arm - Saw Blade Guidance
4.5. Removal of Protective Housing
4.6. Replacement, Tensioning and Adjustment
of the Saw Blade
4.7. Guide Heads - Adjustment
4.8. Hydraulic Unit
4.8.1 Vice Clamping Force Setting
4.9. Setting Band Saw Arm Ascent Height
4.10. Cooling System
5. Commissioning
5.1. Security Check
5.2. Cutting Procedure
6. Saw Blades
6.1. Saw Blade Design
6.2. Selection of Tooth Size
6.3. Optimum Workpiece Clamping
6.4. Running-in New Saw Blades
6.5. Factors Influencing Saw Blade Service Life
6.6. Values Recommended for Cutting
7. Machine Maintenance
7.1. Cleaning
7.2. Removal/disposal of chips
7.3. Coolant system cleaning
7.4. Lubrication
7.5. Principles of Hydraulic Unit Maintenance
7.5.1. Work safety
7.5.2. Commissioning
7.5.3. Hydraulic Liquids
7.5.4. Hydraulic Mineral Oils
7.5.5. Service intervals
7.5.6. Oil Refill and Filter Replacement
8. Hydraulic Unit Wiring Diagram
9. Faults and Remedies
9.1. Repairs
9.2. Failures - Potential Causes and Remedies
10. Electrical Wiring Diagram
11. Assemblies
11.1. Guide Head Assembly
11.2. Arm Assembly
11.2.1. Arm Assembly ARG 260
11.2.2. Arm Assembly ARG 300
11.3. The Table, Turntable, Joint and Vice Assembly
11.3.1. The Table, Joint and Vice Assembly in
ARG 260 S.A.F., ARG 300 S.A.F.
11.3.2. The Table, Joint and Vice Assembly in
ARG 260 plus S.A.F., ARG 300 plus S.A.F.
11.4. Cooling Assembly
12. Accessories
12.1. Laser Guideline Light
12.1.1. Activation and Deactivation of the Laser Beam
12.1.2. Laser Indication on the Machine
12.1.3. Adjustment
12.2. Oil Mist Lubrication
12.3. Vertical Vice for HVP Bundle Cutting
12.4. Electronic arm uplift height setting
12.5. Hydraulic circuit assembly
Summary of Contents for ARG 300 plus S.A.F.
Page 2: ......
