1. The spraying of abrasive materials, is not covered by our Guarantee.
2. Moderately corrosive liquids (stain removers, insecticides, water aqueous solutions) can readily be sprayed from the
Pilot Electric Spray guns.
Information on spraying materials
The appliance can be operated from single - phase AC supply only. Before starting up, check that mains voltages agrees
with operating voltage marked on gun rating plate.
Connection to supply
Pilot Power Stain Removing
Gun is an indispensable aid to the textile and garment industries. To get the maximum
benefit from this appliance it must be looked after. This manual is designed to help you
to keep the machine in good working condition.
1. Don’t operate the gun without liquid.
2. The high-pressure produced from the spray gun might lead to injuries. Therefore do not
point gun at yourself or in the direction of other people.
3. Do not spray abrasive solutions.
4. Use filtered solutions to avoid cloggy of nozzle.
Do's and don't's
Technical Data
Model
TEX 90
Max. delivery rate
0.06 lit/min
(test liquid: water)
Weight
1.30 kg
Rated power
65 W
Voltage
220/110V
Frequency
50Hz / 60Hz
3
Container holds
800 cucm
Noise level
92 - 95 dB
TEX 90
Drive housing
Pump locking screw
Nozzle
Pump housing
Container
Connection
cord
Cover
Control screw
Switch
Handle
