
FORMAT
This sec�on will allow you to format the micro SD card.
NOTE:
Doing so will
erase all stored footage from the micro SD card.
LANGUAGE
Here you can change the language of the dash camera.
AUTO OFF
Your dash camera will automa�cally turn on when your vehicle’s igni�on
has been turned on and automa�cally turn off when you turn off your
vehicle’s igni�on.
By changing this se�ng to
1
minute,
3
minute or
5
minute, the camera will
turn off automa�cally if it is not recording or being used. You can disable
this by choosing
OFF
.
SYS RESET
This will allow you to reset your dash camera to its original se�ngs.
DATE INPUT
This se�ng will allow you to change the dash camera’s date and �me.
A�er adjus�ng the �me and date,
PRESS AND HOLD
the
MENU
bu�on for
3 seconds
to save.
USB
When you connect the dash camera to your PC using supplied sync cable,
you are able to transfer your files from the dash camera to your PC.
Version
To see different displays firmware version installed on the dash camera.
PHOTO MODE
SIZE
If you want to change the size of the megapixels of the images.
SETUP MENU
While in se�ngs mode,
PRESS AND HOLD
the
MENU
bu�on for
3 seconds
and you will enter the
SETUP
mode.
FORMAT
While in the
SETTINGS
sec�on, you can format the micro SD card.
NOTE:
Doing so will erase all stored footage from the micro SD card.
LANGUAGE
While in the
SETTINGS
sec�on, you can change the language of
the dash camera.
Note:
Some vehicle’s 12V cigare�e port provides power even when
vehicle’s igni�on is turned off. In this case, you will have to manually
turn on/off your dash camera.