21
Step for parameter setting:
1. In any real-time data inquiry interface,
press
button,
enter
into
configuration mode
2. Press
button once, the single digit
flash for enter password
3. Press
button once, to change the
single digit to 1 (default password is 1 )
Input password
1. Press
button until it display A
2. Press
button once, then the data
bit flash
3. Press
button once to modify value
4. Press
button once to confirm the
new value
Set communication address
1. Press
button until it display b
2. Press
button once , the value
flash
3. Press
button once to modify baud
rate
4. Press
botton once to confirm the
new baud rate
Set communication baud rate
1. Pree
until it display I
2. Press
button once , the value flash
Set rated current