4.3.2.2
Apply the surface seal, quick application kit (optional).
1
Prepare the windshield as follows:
1.1
Make sure the windshield is clean as given in
.
1.2
Put on a new pair of disposable gloves.
1.3
Prepare the coating solution, quick application kit, refer to the product manual
in the quick application kit, surface seal.
2
Use the applicator pads and apply the coating solution, quick application kit to the
windshield glass surface as follows:
2.1
Apply some of the coating solution, quick application kit, to the applicator pads.
2.2
Start at the center of windshield glass surface.
2.3
Apply the coating solution, quick application kit in fast circular strokes.
2.4
Overlap the circular strokes.
2.5
If necessary, apply more coating solution, quick application kit to make the
applicator pads moist.
2.6
Apply from the center to the edges.
2.7
Continue to apply the coating solution, quick application kit until the windshield
glass surface repels the coating solution.
3
Do step 2 again to apply four to six more layers of the coating solution, quick application
kit to the windshield glass surface.
4
Use clean paper wipes to fully dry the windshield glass surface, start at the center and
dry to the edges.
5
Discard the used applicator pads and the disposable gloves.
6
Remove all the equipment, tools, and materials from the work area. Make sure that the
work area is clean.
7
Do a check of the windshield rain repellent. Do
Check the condition of the rain repellent
Section 2 - Aircraft Servicing
Ground Servicing Guide
Report No: 02484
Issue date: Nov 30, 2020
Page 2-4-16
PC24-A-A15-12-0050-01A-250A-A
