![background image](http://html1.mh-extra.com/html/piko/35040/35040_manual_1556042015.webp)
15
7. Channel selection / Synchronization
In order for the receiver to pick up the signals from the transmitter, it
must be connected to the corresponding transmitter This is done by
simply selecting a channel using a DIP rotary switch.
The transmitter and receiver are
factory-set to channel 0.
Transmitter:
1. Remove the small cover on the
back of the transmitter.
2. You now have access to the DIP rotary switch.
3. The arrow direction indicates the set channel.
4. You can adjust the channel by turning it with a small fl at
screwdriver. Transmitter and receiver must be synchronized
accordingly.
Receiver:
1. Depending on the installation position, you need access to the
DIP turn switch on the main circuit board
2. The direction of the arrow indicates the channel that has been
set.
3. As with the transmitter, use a small flat screwdriver to set the
channel on the DIP turn switch.
Transmitter and receiver must therefore be synchronized
accordingly.
6.1.2 Parallel installation
Receiver
Switch
off
on
off
Step 1
PIKO G
analog
board*
* Fitted as standard in many PIKO G-scale locos. See in the locos instruction manual.
Switch
off
on
Receiver
off
Step 2
PIKO G
analog
board*
* Fitted as standard in many PIKO G-scale locos. See in the locos instruction manual.
DIP
35040-90-7000.indd 15
19.08.19 08:43