It is possible to operate more than one „system“ (one or more Navigators, a Receiver
and an Analog Throttle or Digital Central Station) at once in close proximity by setting
each system to a different channel. Changing channels may also help reduce radio
interference from other devices, such as garage door openers, phones, etc.
Changing channels is accomplished with the Receiver cover off (see section 2.1).
The small DIP switch block next to the Digital cable socket has 4 switches. Note the
„ON“ indication on the DIP switch block. Set switches 1 and 2 per the following chart,
according to the channel/frequency desired. Refer to the instructions packed with the
Navigator remote for setting the Navigator‘s channel.
# 35012 EU Version
Channel/Frequency Switch 1
Switch 2
Switch 3
Switch 4
1 = 433,1 MHz
OFF
OFF
(OFF)
(OFF)
2 = 433,6 MHz
ON
OFF
(OFF)
(OFF)
3 = 434,2 MHz
OFF
ON
(OFF)
(OFF)
4 = 434,7 MHz
ON
ON
(OFF)
(OFF)
# 35022* US Version
Channel/Frequency Switch 1
Switch 2
Switch 3
Switch 4
1 = 915 MHz
OFF
OFF
(OFF)
(OFF)
2 = 916 MHz
ON
OFF
(OFF)
(OFF)
3 = 917 MHz
OFF
ON
(OFF)
(OFF)
4 = 918 MHz
ON
ON
(OFF)
(OFF)
Image 2: Channel Setting
* Item numbers for the American market only: #35021 Navigator, #35022 Wireless Receiver
Switch block
ON
OFF
