13
3.
Squeeze the On/Off switch, which will actuate the trigger
switch lever to press the trigger inside the sprayer (Fig.
19).
4.
Spray perpendicular to the surface with smooth passes at
a consistent speed as illustrated below. This will help to
avoid irregularities in the finish (Fig. 20).
NOTE:
When spraying, always switch on the sprayer after
moving and release the On/Off switch before stopping
moving. Always keep the sprayer pointed perpendicular to
the spray surface and overlap passes slightly to obtain the
most consistent and professional finish possible.
5.
Release the On/Off switch to stop the unit. Remove the
battery before storage or any adjustment.
Spray Tips
•
Practice spraying on a scrap material like cardboard to
test the spray pattern and get familiar with the flow control
feature of the sprayer.
•
Ensure the surface to be sprayed is free of dust, dirt,
and grease.
•
Ensure spray area is clean and free of dust that could be
blown onto the newly sprayed surface.
•
Keep the nozzle at a minimum of 12 inch and a maximum of
36 inch away from the surface (Fig. 20).
•
To get an even spray distribution, keep your arm at the
same distance and avoid moving the wrist during spraying
(Fig. 21).
Starting the Machine
1.
Next fill the container by removing it from the sprayer.
Turn the container counter-clockwise to remove it. Note:
you must hold on to the container, or the container will
fall to the floor.
2.
Insert the tank into the sprayer and rotate the container
until you the container is snug and not loose.
3.
Insert the charged battery into the battery socket and
lock in place.
4.
Pull on the handheld trigger to begin the flow of solution.
Apply solution as fast as you can walk 2-3 feet from
surfaces. Do not over saturate.
After working, before leaving the machine:
1.
Remove Battery from the unit
2.
Remove the container by removing it from the sprayer.
Turn the container counter-clockwise to remove it. Note:
you must hold on to the container, or the container will
fall to the floor.
3.
Add: Clean water to container
4.
Insert the container into the sprayer and rotate the
container until you the container is snug and not loose.
5.
Spray (1 Minute) until clear water is present
Fig. 20
12 inch
(30 cm) to
36 inch
(91 cm)
Fig. 21
Summary of Contents for Pike-1000
Page 18: ......