PIKA REbus Beacon, Installation Manual

Page: 5 / 12

5 REbus Beacon Installation Manual M00020-01
Section 2: Safety Information
Section 2: Safety Information
General Warnings
SHOCK RISK: HIGH VOLTAGE ELECTRICITY
WARNING: To reduce the risk of injury, read all instructions and caution
markings before installing Beacon. Consult installation documentation for
all other REbus devices on the system.
WARNING: Beacon must be installed by trained and qualified technicians,
and in accordance with all instructions.
WARNING: Electrical installation in the United States shall be done in
accordance with all local electrical codes and/or the National Electrical
Code (NEC), ANSI/NFPA 70.
WARNING: Electrical installation in Canada shall be done in accordance
with all local electrical codes and/or the Canadian Electrical Code.
WARNING: Connecting the Pika Energy Island to the electric utility
grid must only be done after receiving prior approval from the utility
company and installation completed only by qualified personnel/licensed
electrician(s).
WARNING: This equipment is NOT intended for use with life support
equipment or other medical equipment or devices.
WARNING: Disconnect all smart batteries and turn their Battery Disconnect
switches to OFF before servicing the inverter or touching electrical
terminals. Refer to smart battery documentation for complete safety
instructions.