Pik Rite Hydra-Ram HR550, Operation And Parts Manual

Page: 24 / 94

24 | HR550 Manure Spreader 2020 | Pik Rite Inc.
OPERATING THE SPREADER
PREOPERATING CHECKS
1.
Be sure spreader does not contain any foreign objects
2.
Check for correct hydraulic hookup. Raise endgate fully. Engage
beaters, engage apron chain
3.
Disengage apron chain, disengage beaters
4.
Close endgate
LOADING THE SPREADER
Do not place rocks, timbers, or other solid objects in the spreader.
Objects of this nature can damage the spreader and could also be
thrown great distances causing possible injury to anyone standing in
the vicinity.
Load front of spreader first, distributing load evenly.
When operating without an endgate, avoid loading manure against the
beater.
PREPARE TO UNLOAD THE SPREADER
Help prevent personal injury. Be sure no one is near spreader and
tractor before operating.
Start beater by engaging PTO slowly at low engine rpm. Increase to
“PTO RATED” speed.
For best spreading results, operate tractor at “PTO RATED” speed.
Do not operate apron chain without running the beaters as this may
damage the spreader.