T H E M O D E R M - B U S T E C H N O L O Y
18
Ve
rs
io
n E
.3
.0
1.0
0
6.1.5
General Configuration
In General Configuration all different versions of the software installed on your unit are shown.
You can also upload configuration files to the gateway that will be used for M-Bus Master or for
the chosen Slave Port. It is also possible to remove configuration files that are no longer used
from this site.
This is also where you can re-start the M-Bus Hub if necessary.
Figure 6-4
6.1.5.1
Pi-900S/T Version
Pi-900S/T Version is named with date (year month day/xxxx-xx-xx). The Pi-900S/T is the
gateways system program and also includes the webserver with its configuration interface. The
latest version can be downloaded from the PiiGAB website.
6.1.5.2
MBusHub Version
MBusHub is the program that handles all the communication with the different ports such as the
Master Port and Slave Ports. The program also handles the parts pertaining to M-Bus Switch,
Modbus, and M-Bus ASCII. The latest version can be downloaded from the PiiGAB website.
6.1.5.3
Upload, Download, Remove CSV/XML-File
If you are using the gateway with Modbus, M-Bus ASCII or with QuickPost, these configuration
files will be uploaded to PiiGAB M-Bus 900S/T here. If you want to read back an existing
configuration or delete old configuration files you can do this here.
6.1.6
M-Bus Master Output
The different master ports can be turned on or off via the web interface. The purpose of this
function is to be able to troubleshoot locally or remotely on the different M-Bus loops.
All loops are set to
On
at the start or at Reboot. At re-start the outputs keep their positions
Figure 6-5
