Getting started PiiGAB 810
Rev 1.00.01
© PiiGAB Processinformation i Göteborg AB
Page: 15
8.5 Secondary address
– Identification number and wild cards
As the same with primary addresses, make sure the meter responds to the actual secondary
address. For the secondary address there is often just enough to specify the identification
number.
1. Configure as the picture shown below
2. Press the
Find
button and test the communication with the meter.
8.6 Entire secondary address
If the meter doesn’t respond to the identification number you can enter the entire secondary
address.
1. Configure as the picture shown below
2. Press the
Find
button and test the communication with the meter.
