background image

 

 
Guided Tour: 

 
The following steps guide you through the sonic palette of the EP2

 

and 

show you how to get at the full range of tones it has to offer.  
 

Envelope (EF) Controls 
 
1.

 

Set all of the controls fully counter-clockwise and set all of the toggle 
switches to the left.

 The EF LED should be lit, and all the other LEDs 

should be off. The EP2 is in bypass mode. Be sure to turn the volume 
knob on your guitar all the way up. Play your instrument and make 
sure a clean sound is passing through. 

2.

 

Turn up the SENSITIVITY control all the way (fully clockwise) and turn up 
the resonance control to 12:00.  Now ENGAGE the pedal by pushing 
the right footswitch. Play you instrument; you should hear the phaser 
sweeping up in response to your picking. Adjust the SENSITIVITY control 
to adjust how much signal it takes to open the envelope. 

3.

 

Turn up the RESONANCE control all the way to get a really in-your-
face envelope tone happening. Turn the RESONANCE control down 
to get a much more subtle tone. Experiment with the range of this 
knob and then leave the RESONANCE control at 3:00 as we move on.   

4.

 

Put the STACATTO switch in the ON position and play some notes with 

space between them. Notice how the LED in the center of the pedal 
goes instantly dark when you mute the string instead of gradually 
fading out. The STACATTO mode is recommended for fast picking and 
slap bass styles.  

5.

 

Put the EF SWEEP toggle switch in the DOWN position and experiment 
with this sound. You may find that a slightly different SENSITIVITY setting 
may be desirable to achieve your ideal downward sweeping sound. 
Experiment to find your personal tone. 

6.

 

Put the INVERT switch in the negative (–) position. You will notice that 
this sound has less bass compared with the positive (+) mode. Listen to 
and compare both modes and then leave the switch in the + position 
as we move on.  
 

Rotary (LFO) Controls:

  

7.

 

Push the left footswitch to turn on the LFO. The green LED should now 
come on. Turn the DEPTH control all the way up and set the CENTER 
and SPEED controls to 12:00.  

Summary of Contents for Envelope Phaser II











Reviews: