STEP 1
Remove (16) retaining cap and
(17) split gasket from inside of
(18) tank. Insert sump pump
electrical plug through (16)
retaining cap and place (17)
split gasket around the electrical
cord. Pull electrical cord through
opening. Hand-tighten to snug
(16) retaining cap with (17)
gasket to side of (18) tank.
NOTE: Leave some slack in cord
between (16) retaining cap and
(1) sump pump.
STEP 2
Attach end of (8) 10 foot
vacuum hose to intake port
on side of the (18) tank.
STEP 3
Attach remaining end of (8)
10 foot vacuum hose to non-lid
end of (9) filter canister.
Attach end of (11) 25 foot
vacuum hose to lid end of
(9) filter canister.
Assembly Instructions
In North America phone: 1-800-HOT-HOGS
®
www.newpig.com
Assembly Instructions for
TLS146
ITEM
#
DESCRIPTION
1
SUMP PUMP
2
1 ½” TO ¾” REDUCER
ASY.
3
CHECK VALVE
4
FLEX TUBING
5
VACUUM MOTOR
6
TOP VACUUM HOUSING
7
LATCH
8
10’ VACUUM HOSE
9
FILTER HOUSING
11
25’ VACUUM HOSE
12
45 degree elbow
15
WATER BOOM (PLR225)
16
RETAINING CAP
17
SPLIT GASKET
19
½” UNC FEMALE INSERT
20
1 ½” NPT drain plug
18
BOTTOM VACUUM TANK
14
¾” HOSE FITTING
13
VACUUM INTAKE DISC
10
FILTER BAG
STEP 4
Attach remaining end of
(11) 25 foot vacuum hose
to large opening on
(12) 45 degree elbow.
Push small end of
(12) 45 degree elbow
inside (13) vacuum intake
disk.
STEP 5
Place (6) top vacuum
housing on (18) tank and
rotate until all 3 latches align
with their corresponding
cut-out on the (6) top
vacuum housing and latch.
NOTE: The latches will only
align in one position.
STEP 6
Attach garden hose to
(14) hose fitting.
Run garden hose to
containment vessel or drain.
10-8-07 r1
165688
16
17
Intake
port
8
Non-Lid
end
Lid
end
8
11
13
12
11
Garden
hose
6
7
14
5
6
7
8
9
10
11
15
12
13
18
19
14
20
1
2
3
4