FITTING INSTRUCTIONS:
Note: This blanket is intended to be used
as an over blanket and therefore should
always be placed on top of an individual,
not under them, on the top of a bed
sheet, or under them on a mattress.
Do not tuck it in around or under the person.
It should remain loose so as not to
prohibit the movement.
Ensure there is a mains supply is nearby and that
when in use, the mains lead will not be in a
position that could cause people to trip over it.
When plugged into the mains supply, the
controller must be within easy reach of the user.
Do not cover the controller and do not
exert pressure on the controller.
WARNING: Ensure the blanket is not
folded, rucked or creased.
When in use, do not cover with pillows.
USING YOUR APPLIANCE
1.
Connect the control to the blanket (the
blanket has a socket attached that the
control slots into) and ensure it is fully
and securely connected.
2.
Plug the blanket in and turn the ON/OFF
switch on the control to the ON position.
3.
When the blanket is first switched on, it
will be in standby mode. The yellow
indicator light on the control will be on.
4.
To preheat the blanket, press the
temperature button 5 times to reach the
highest temperature. The corresponding
temperature indicating light will light up
red. Preheat for 30
– 60 minutes.
5. Press the temperature button to
select your required temperature.
Note: It is recommended to leave the
blanket on the lowest temperature if
you are going to leave it on overnight.
6.
Press time to select the required
time, from 1 to 8 hours. The green
time indicator light will glow.
7.
Press cancel at any point to reset
the settings and return to standby.
8. Once the select time is up, the
blanket will return to standby mode.
9.
Turn the blanket off by moving the ON/
OFF switch on the control to the OFF
position, and unplugging at the mains.
Timer:
There are 4 time settings to choose from:
1 hour
2 hours
4 hours
8 hours
Temperature:
There are 5 temperature settings to
choose from, ranging from high to
low. Select a temperature by
pressing the temperature button.
Low:
Press once
Medium Low:
Press twice
Medium:
Press three times
Medium High:
Press four times
High:
Press five times
7
