background image

7

www.pifco.co

FITTING INSTRUCTIONS:
Note:

 This product can be used with any 

type of bedding including waterproof bed 
protectors. Use only as an under blanket and 
do not use above the occupant of the bed.

Your fitted electric blanket will have an elastic 
skirt sewn into the blanket.
1.  Place the electric blanket on the bed with 

the controller at the pillow end with the 
connector facing upwards. 

2.  Smooth out the folds and wrinkles of the 

blanket. Then secure the elastic skirt over 
each of the bed’s four corners.

3.  Once the blanket is secure check for 

any kinks in the power cord or heating 
elements and smooth them out.

WARNING!

 When you position the cable, make 

sure it DOES NOT become trapped or kinked 
by any other objects or furniture during use and 
storage. Poor positioning of the power cable 
may result in injury and/or damage to the user 
and their property.

CAUTION!

 Ensure the blanket is not folded or 

creased. 

USING YOUR APPLIANCE

•  Ensure the blanket is fitted to the bed 

correctly, see diagram opposite

•  Plug the power lead into the closest 

socket. Ensure that the lead is not 
stretched. DO NOT use an extension cord 
with this appliance.

Preheating The Bed

•  Move the heat setting on the control 

switch to heat level 2 or 3, depending on 
the level of the heat required.

•  Allow approximately 60-90 minutes 

for the blanket to heat the bed 
thoroughly,although this time may vary 
depending on the room temperature and 
type of bedding used.

•  In cold weather, all electric blankets 

will take longer to heat the bed to a 
comfortable temperature. Please allow 
for this.

All Night Use

Note:

 Blankets are safe to be used all night. 

However we recommend using the heat setting 
below.
•  Move the heat setting on the control 

switch to heat level 1. This setting will 
provide safe and comfortable heat to 
sleep on all night. This setting can be 
used to air the bed.

WARNING:

 Always ensure that the slider switch 

is moved to the OFF position when you get up 
the next day, or after airing the bed.

Summary of Contents for P47002













Reviews: