
Parts Identification
Technical Data
Specification
Model No.
P44009 all colours
Rated Voltage & Frequency
220V-240V 50Hz
Power consumption
500W
Guarantee
This product is guaranteed for 12 months from the date of original purchase. If any
defect arises due to faulty materials of workmanship the faulty products must be
returned to the place of purchase. Refunds or replacement is at the discretion of the
retailer.
The following conditions apply
:
The product must be returned to the retailer with proof of purchase.
The product must be installed and used in accordance with the instructions con-
tained in this instruction guide.
It must be used only for domestic purposes.
It does not cover wear and tear, damage, misuse or consumable parts.
PFD has limited liability for incidental or consequential loss or damage.
This guarantee is only Valid in the UK and Eire Only.
Sutton House,
Berryhill Road,
Fenton
Stoke on Trent
Staffordshire,
ST4 2NL.
Helpline Number
0 8 7 1 2 2 1 3 6 1 5
WWW.PIFCO-PRODUCTS.CO.UK
GENERAL SAFETY INFORMATION
Read all instructions before using Heater.
.Use this Heater only as described in this manual. Any other use not recommend-
ed by the manufacturer may cause fire, electrical shock, or injury to persons.
Make certain that the power source conforms to the electrical requirements of
the Heater.
Extreme caution is necessary when any Heater is used by or near children or
invalids and whenever the Heater is left operating unattended.
The appliance is not intended for use by children or the infirm, unless they have
been given supervision and/or instruction concerning use of the appliance by a
person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacture or its
service agent or a similarly qualified person in order to avoid a hazard.
Do not operate any Heater with a damaged cord or plug or after the Heater
malfunctions, has been dropped or damaged in any manner. Return Heater to
qualified electrician for examination, electrical or mechanical adjustment or repair.
Unplug power cord before servicing or moving the Heater. Always unplug
theHeater when not in use.
Do not insert or allow fingers or foreign objects to enter any ventilation
or exhaust opening as it may cause an electric shock or fire, or damage
the Heater.
Do not block or tamper with the Heater in any manner while it is in operation.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Do not place on soft surfaces, like a bed, where openings may become blocked.
Always place the Heater on a stable, flat, level surface when operating, to avoid
the chance of the Heater overturning. Locate the Power Cord so the Heater
or other objects are not resting on it.
Do not run Power Cord under carpeting.
Do not cover Power Cord with throw rugs, runners, or the like. Arrange Power
Cord away from room traffic and where it will not be tripped over.
This Heater is hot when in use. To avoid burns, do not let bare skin touch hot
surfaces. Always use handle when moving this Heater.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes
and curtains at least 3 feet (0.9 m) from the front of the Heater and keep them
at least 1 foot (0.3 m) from the sides and rear.
1. Power Light.
2. Element Guard.
3. Heater Body.
4. Off/On switch
5. Power Cable
3
4
2
1
5