Pifco P29016, Safety & Instruction Manual

Page: 7 / 12

7 www.pifco.co
ASSEMBLY:
1. Connect the scrubber handle to the
extension pole until you hear a click.
2. Attach the brush head assembly to the
extension pole until you hear a clicking
sound.
3. Fasten one of the brush heads onto the
brush head assembly by pushing it until
it is secure. To remove or exchange the
brush head, hold the base of the scrubber
head and pull on the brush head firmly.
CHARGING:
Before first use, charge the appliance for 20
hours. Later charges will take 5-7 hours.
Make sure that the power scrubber is turned
off while it charges.
1. Open the charging cover (located on the
end of the Scrubber Handle).
2. Plug one end of the power adaptor into
the charging port and the other into the
mains outlet.
3. A red indicator light will turn on while the
appliance is plugged into the mains and
charging.
Note: The indicator light will NOT turn off
when the appliance is finished charging,
and will stay on while the appliance is
plugged into the mains.
4. Charge the appliance for 5-7 hours.
A single charge will last up to 45 minutes.
Note: The unit may become warm while it
is charging.
5. When charging is complete, disconnect
the adaptor from the appliance, unplug
it from the mains and close the charging
cover.
DC 8V IN