Piezo liteFon 1030, User Manual, Page: 7 / 18

Line cord
The connector cable has two identical plugs RJ11. Insert one in the socket marked with the
telephone symbol on the backside of the device. Insert the other plug in your telephone connection
socket.
Handset cord
The receiver cable also has two identical lugs. Insert one into the socket at the receiver and the
other one in the marked socket on the device.
Use of the power supply unit
Connect the power supply unit with the telephone and the electricity supply system.
Use of the batteries
1. Open the battery compartment
2. Insert three AA-batteries or rechargeable batteries (note the polarity!)
3. Close the battery box. The cover has to click into place
You have the possibility to use the telephone either with the power supply unit or with batteries.
If you have no power supply or batteries for the telephone, you can still use the telephone to
make and receive calls, but you will not be able to use other functions on the telephone, e.g.
the directory, direct dial, redial, or CLIP.
Recommendations for the location of the telephone
Your telephone has been manufactured for normal conditions of use. Nowadays furniture is treated
with a large variety of gloss paint and synthetic material. There may be a possibility that some of
these materials affect the plastic feet of the telephone, or that these plastic can leave traces on the
furniture. For understandable reasons, we cannot be made liable for these damages. We
recommend the use of a non-slip pad.
liteFon 1030 user ʻ s manual
Page 7