MT334-I
Rev. 0.3 08/04/2022
10 - 22
Document classified as: 2 - Company Confidential
5
User’s menu
Under normal operating conditions
M-LOG PLUS
keeps the display off. To access the main menu,
press the
OK
button.
You can navigate in the menu using the keys
. the keyallows you to access the submenus if
available. The key
allows you to return to the previous menu.
The menu can only be used to view quantities already configured in the equipment or to force
predefined actions. It is not possible to edit the configurations set.
MENÙ
Ok
RTU state (Operating, Excluded, Calibration)
Id Device
→
Set ID - Inbound
Device’s identification Number
Date&Time
→
Current Date and Time
Historicization
Historicization Interval
Residual Shift
Residual time shift
Input
State
→
Analog Inputs
→
AN1
Current value of analogue input 1
AN2
Current value of analogue input 2
AN3
Current value of analogue input 3
Digital Inputs
→
DI1
Current Value Digital Input 1
DI2
Current Value Digital Input 2
DI3
Current Value Digital Input 3
DI4
Current Value Digital Input 4
DI5
Current Value Digital Input 5
DI6
Current Value Digital Input 6
Counters
CNT1
Current Value Counter 1
CNT2
Current Value Counter 2
Battery
→
RTU Battery
→
Hours Left
% LE
–
BP Battery Pack Status
Modem Battery
→
Hours Left
% HP1 - BP Battery Pack Status
Archive Modem
Batt
→
Actual State
Actual Calls Number
Previous States
Previous Calls Number (9 elements)
Print Archive
Print archive over the serial Line
Modem
→
Call Centre
Force a call to the configured remote management
centre
Id Modem
Id Modem associated with RTU
→
Conf Modem Centre
ID Configuration
Start GSM Data
Force starting the modem in GSM data mode
GSM Signal
View GSM Signal intensity
Modem Local Echo
Redirect modem data to local IR port (for testing purp.)
Last connection
Last Connection Date
State
→
Diagnostic
See Table 2
→
Diagnostic tel
Diagnosis of calls for each single number called
Buffer Events
→
Event 1, 2...
Events Buffer
Reset Events
Reset Events Buffer
Print Events
Print Events over the Local Serial Port
Connection
TPOWER
Indicates if the RTU is connected to TPOWER
Sistema
→
S/N Device
Serial Number RTU
S/N Press. 1
Serial Number transducer 1
S/N Press. 2
Serial Number transducer 2
S/N Press. 3
Serial Number transducer 3
Service
→
Silencing
Turn off the modem and cancel alarms
Type
Configure the peripheral type
Total Reset
Delete RTU configuration and reset
Exclusion
→
Activate/Deactivate
Activate or Deactivate Maintenance Mode
Modem ON
→
Activate/Deactivate
Activate or Deactivate Modem always ON mode
SW VER
View Firmware and Hardware revisions
Table 1: Operating Menu
