11
HBC 975
Use, maintenance and warning manual
SLAM-SHUT VALVE
|
GENERAL INFORMATION
|
REV. 00
EN
2 - GENERAL INFORMATION
2.1 - MANUFACTURER IDENTIFICATION
Manufacturer
PIETRO FIORENTINI S.P.A.
Address
Via Enrico Fermi, 8/10
36057 Arcugnano (VI) - ITALY
Tel. +39 0444 968511 Fax +39 0444 960468
www.fiorentini.com
Tab. 2.2.
2.2 - IDENTIFICATION OF THE PRODUCT
Equipment
SLAM-SHUT VALVE
Model
HBC 975
Tab. 2.3.
2.3 - REGULATORY FRAMEWORK
PIETRO FIORENTINI S.P.A.
with registered offices in Arcugnano (Italy) - Via E. Fermi, 8/10, declares under its sole respon
-
sibility that the equipment of the HBC 975 series described in this manual is designed, manufactured, tested and checked
in compliance with the requirements of the EN 14382 standard.
The equipment meets the requirements of Directive 2014/68/EU (safety accessory as per PED directive). The assessment
procedure adopted is in accordance with module H1 according to Annex III of the Directive.
NOTE!
The declaration of conformity in its original version is delivered together with the equipment and this oper
-
ating and warning manual.
2.4 - WARRANTY
PIETRO FIORENTINI S.P.A. guarantees that the equipment was manufactured using the best materials, with high quality
workmanship, and complies with the quality requirements, specifications and performance set out in the order.
The warranty shall be considered null and void and PIETRO FIORENTINI S.P.A. shall not be liable for any damage and/or
malfunctions:
• due to any acts or omissions of the purchaser or end-user, or any of their carriers, employees, agents, or any third
party or entity;
• in the event that the purchaser, or a third party, makes changes to the equipment supplied by PIETRO FIORENTINI S.P.A.
without the prior written approval of the latter;
• in the event of failure by the purchaser to comply with the instructions contained in this manual, as provided by
PIETRO FIORENTINI S.P.A.
NOTE!
The warranty conditions are specified in the commercial contract.
Summary of Contents for HBC 975
