Piesia 1037U-3, Manual, Page: 10 / 11

Motherboard Interfaces Description
- 10 -
2.22 JP1
AT starting mode jumper line.When you choose “Close” , the DC power plug,then the board
electrify at the same time.
PS_ON Starting Mode Selection
Close AT power starting mode
Open ATX power starting mode
Remark
：
JP1 & FP1 combine to a pin header:2x6
、
2mm.The JP1 function can be lead to the
Front/Rear panel of the chassis.
2.23 MPCIE1
MPCIE1 is standard Mini-PCIE socket,suit for full-size card.The half-size card Mini-PCIE
card,must be fixed with a extended card.
2.24 SIM1
MPCIE1 affiliated SIM card slot,for 3G function.
2.25 CPU_FAN1
、
SYS_FAN1
FAN interface support maximum current 0.3A,definition as below:
CPU fan connector,rotational speed adjust automatically.The maximum voltage is the power
input voltage.Please choose a suitable fan,when the input voltage is higher.SYS fan does not support
adjust automatically.