6
Box for solid granular fertilizer
Made of stamped metal sheet and featuring great capaci-
ty. It is protected by epoxy paint in the inside and its
bottom is made of stainless steel
(Picture 1-G).
Hydraulic jack
Used for wheels alignment operations. (Not included in
Model TD 21 x 30 rows)
Wheels
Provided with four (400/60 x 15.5” - 14 PR) tires per
module in models TD 21 x 18 rows; TD21 x 24 rows,
TD21 x 36 rows, TD21 x 48 rows and (14 x 17.5” - 14 PR)
for model TD21 x 30 rows
(Picture 1-H).
Speed gearboxes
27-speed gearboxes independently operating for seeds,
fertilizer and lucerne.
Drive wheel
There is one (6.00 x 16 “- 6 PR) drive wheel per module
which is situated at the rear part of the equipment. It has
no clutches and it is supplied with a spring floating system
that allows the wheel to be always in contact with the
ground while the machine is planting
(Picture 2).
B) Parts identification
Left module:
(Picture 3-A)
If we observe the machine from
behind and work oriented, we are able to identify this
module as it is situated on the left hand-side and it holds
the transport hitch.
Right module:
(Picture 3-B)
If we observe the machine from
behind and work oriented, we are able to identify this
module as it is situated on the right hand-side.
Picture 2
Picture 3
Figura 3
B
A
