STR-50 “PIN STRIP”
INSTRUCTION MANUAL
Page 2
Date rev. 26/04/2016
Rev. 03
1. INTRODUCTION
The constant development of connectors such as “Pin Strips” and the consequent increase in their use,
suggested Piergiacomi to develop a new specific pliers for a perfect, fast and easier cut of this kind of
connectors.
Actually, the using of the classic cutters on the market for the “Pin Strip” cutting, does not allow to have
satisfactory results both in terms of time and quality (clean cut, burrs presence etc...).
Piergiacomi’s pliers mod. STR-50 make easier and fast the cutting operation, leaving the part well finished
and without burrs. Thanks to the two adjustable blades supplied with the tool, it is possible to adjust the cut
at different
pitches, making the pliers ideal for both straight and angled “Pin Strips” no matter if with
different pitch.
Furthermore the STR-50 pliers does not need maintenance and thanks to its small size, lightweight and
ergonomic grip, it is easy to use and to handle.
High quality of its materials guarantees a long life of the tool.
2. TECHNICAL DESCRIPTION
LOWER BLADE
FIXING BLADE KNOB
ADJUSTMENT SCREW
SLIDING ADJUSTMENT
BLADE
UPPER BLADE
RECOVERY SPRING
Fig. 1
HANDLES
HANDLE
BLADE STOP
