PierDeco AquaMassage PD-845, Owner'S Manual

Page: 5 / 8

HOW TO SET & USE YOUR NEW SHOWER
COLUMN
You can activate more than one function at the time, ex.;
body jets and rain shower. However the water pressure will
be reduced and the vigour of the jets will be affected.
From top to bottom :Turn the control to the left and the water
pressure will increase gradually up to the maximum, the fi rst
handle controls the shower head, the second one controls
the body jets and the third one controls the handheld shower.
However, for all TS (tub & shower) models, the third handle
controls the water pressure and transfers the water to the
spout diverter, which allows you to fi ll the bathtub, to redirect
the water to your handheld shower or to test the water with
your foot.
TEMPERATURE PRESET
The temperature of the shower column is preset at 38°C
(100°F).
MAINTENANCE
To preserve the look and fi nish of your shower column, you
should dry the shower column after each use with a dry and
clean cloth. Do not leave any soap residue on the surface
of the shower column, it can contain acid and acid can burn
the rubber injector and the glass shelf. Never use abrasive
cream, powder cleaner or steel wool pad on the surface, it
can scratch the stainless steel and damage the fi nish .
HOW TO CLEAN THE JETS
Use a soft bathroom cleaner and a little toothbrush.
Spray cleaner directly on the jets and brush every little hole
then rinse thoroughly with clean water.
THERMOSTATIC CARTRIDGE MAINTENANCE
The thermostatic cartridge is guaranteed against
manufacturing defects, but not against the accumulation
of lime caused by water. It is recommended to turn the
thermostatic handle completely to the left and to right on a
weekly basis to prevent the accumulation lime which can
cause the malfunction of the thermostatic cartridge. See the
troubleshooting section on page 5 to estimate the problem.
Please see our video on Youtube to follow the
instructions in order to maintain your thermostatic
cartridge.
pierdeco.com/youtube
Page 5