Pierce PSHDH20000, Owner'S Manual

Page: 7 / 20

OPERATION
• Apply the parking brake or lock the wheels.
• While the clutch is in the OUT position, spool
the winch cable and connect to an anchor point.
• Check cable rigging before proceeding.
• Plug in the winch remote control.
• Engage the clutch by shifting it into the IN
position. NOTE: When the clutch is engaged,
your load may begin to drift until the remote
is used to recover your load. To ensure safe
operation, it is recommended that winch
operation take place from the driver’s position.
• Start vehicle engine, select neutral or park and
maintain idle engine speed.
• Using the remote control, press IN or OUT until
the vehicle has been retrieved. Regularly check
the winch to ensure the cable is winding onto
the drum evenly. It is recommended you secure
the load using chains or straps at this point.
• Detach the load.
• Re-spool the wire rope after winch operation is
complete.
MAINTENANCE
NOTE: It is highly recommended that you regularly use your winch. Simply power the cable out 15 feet, free
spool five feet and power in. This will keep all components in good condition so that the winch can be ready
when needed. Contact the manufacturer or authorized outlet for technical assistance and repairs.
LUBRICATION
• The gearbox has been lubricated using high
temperature lithium grease at the factory. No
internal lubrication is required.
• Lubricate cable periodically using light
penetrating oil. Inspect for broken or worn
strands and replace if necessary.
SPARE PARTS
• A comprehensive range of spare parts is
available. Please contact the manufacturer,
Pierce Arrow at 940-538-5643 for more
information.
• DO NOT attempt to disassemble the gearbox.
Disassembly may void the warranty. Call Pierce
Arrow at 940-538-5643 before repairs are made.
ROPE
• Use aircraft grade cable or approved and rated
synthetic rope.
• The life of the rope is directly related to the use
and care it receives.
• Replace damaged or frayed rope with
manufacturer’s identical replacement part.
• Be sure the rope is in good condition and is
properly attached.
• DO NOT use the winch if the rope is frayed.
• DO NOT replace the cable with a cable of lesser
strength.
• When the rope is replaced, apply Loctite 7471
primer or 222 Threadlocker to the wire rope
clamp to prevent loosening of the screw.
7