Canāree i1 Deployment Options
Canāree i1 supports a variety of deployment scenarios to IoT-Enable Piera IPS-Series
Intelligent Particle Sensors in most common networking environments including:
Wired Ethernet / PoE Powered
Operating as a Class 0 PoE+ Device consuming < 2W @ 48VDC the device will receive
power and internet access from an Ethernet Switch or “48V PoE Injector” using either
DHCP (Default) or Static IP Addressing.
Canāree I1E Ethernet Port
48V PoE+ Switch or Injector
Wired Ethernet / USB Powered
If your Ethernet Switch does not support PoE+ for power the device can be powered
via a reliable USB 5V source including standard power adapters or battery packs. The
power source used should support up to 1.5Amps such as most Rapid Charger USB
Adapters. Internet access is provided via the Ethernet Connection using DHCP
(default) however Static IPv4 addressing is supported.
Piera Systems Inc. reserves the right to make corrections, modifications enhancements, improvements and other changes to its products and
services at any time and to discontinue any product or service without notice. Please contact Piera Systems anytime to obtain the latest relevant
information - We are ready to help you determine which of our solutions will best meet your needs contact
for information.
© 2021 Piera Systems Inc.
Page | 2
