9
TECHNICAL SPECIFICATIONS
Device name :
PIEPS PRO BT/POWDER BT
Transmission frequency:
457 kHz
Field strength:
max. 7 dBµA/m (2,23 µA/m) at a distance of 10 m
Power supply:
3x Alkaline (AAA) LR03 1.5 V or 3x Lithium (AAA) FR03 1.5V
Battery lifetime:
400/200 h (Alkaline) 600/300 h (Lithium)
Maximum range:
60 m
Search strip width:
60 m
Dimensions (LxWxH):
118 x 76 x 29 mm
Weight:
230 g (incl. batteries)
Temperature range:
-20°C to +45°C (-4°F to +113°F)
CONFORMITY
CONFORMITY
EUROPE
Hereby, Pieps GmbH declares that the radio equipment type PIEPS PRO BT/POWDER BT is in compli-
ance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.pieps.com/conformity
USA/CANADA
Manufacturer: Pieps GmbH | Country of origin: Austria | Type/Model: PRO BT/POWDER BT
FCC ID: REMDSP04, contains FCC ID VPYLBZY | IC: 7262A-DSP04, contains IC 772C-LBZY
USA: FCC Notice, Cautions and Statement
This device complies with the Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residual installation. This equipment generates, uses and can radiate fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
