background image

Manual TMicro Subwoofer MKII 
 

Daily Use 
_____________________________________ 

Precautions and Unpacking Procedure 

 

Ensure particularly that the subwoofer is installed and 
connected in accordance with the instructions of this manual. 
The TMicro Sub is designed for use in dry residential 
environments with a temperature range of 10 …40

 C.Refer 

servicing exclusively to qualified and Piega authorized service 
personnel. 
 
Unpacking: Please pay attention to the same precautions and 
warnings as for unpacking the TMicro loudspeakers. 
 
 
 
 
 
 
 

 

_____________________________________ Terminal 

area 

 

Many connection options offer a wide number of configurations, 
both for stereo and for surround mode. The stereo amplifier 
integrated in the subwoofer allows subwoofer, TMicro 3, 
TMicro5 to be combined with a flat screen TV, MP3, iPhone, 
etc. to produce a really small hi-fi system. 

 

Cinch terminals (L+R) for connecting to the AV-receiver, stereo 
amp or MP3-player require connection cables with cinch plugs.  

 

The high level Input terminals (IN) for connecting amplified 
music signals can be connected to loudspeaker cables with or 
without banana plugs. 

 

The high level Output terminals (OUT) enable satellite 
loudspeakers to be connected to the integrated stereo amplifier 
of the subwoofer. 

 

Connecting the supply cable: Check wheter the default switch 
position (240/120 V) of your subwoofer corresponds to the 
standard supply voltage in your country. 

 

Do not switch on the subwoofer (POWER ON) until all cable 
connections have been made. 

 

The ‘AUTO’ switch enables the subwoofer to switch on auto-
matically as soon as a signal is received. When the switch is in 
‘ON’ position, the subwoofer stays permanently switched on. 

 

‘SUB VOL’: Use this knob to adjust the subwoofer volume. 

 

‘VOL’: Use this knob to adjust the volume of the subwoofer and 
the bookshelf speakers. 

 

The upper limit frequency of the subwoofer can be adjusted as 
required using the ‘Crossover’ knob 

 

Switch Phase 0° / 180°: Phase setting / Phase reverse. 

 

The lower limit frequency can be set with the ‘SAT’ 3-position 
slide switch, depending on the size of the loudspeaker used. 

 

Warranty Conditions 

 
The warranty is limited to six years on our loudspeakers and three years on our electronics in accordance with the conditions stated below. Read through 
the service and warranty conditions carefully, especially the warnings concerning the purchase of PIEGA loudspeakers from unauthorized dealers.  
 
1.  Every Piega device leaves the factory in perfect condition. If any manufacturing and/or material defects are found during normal use of the device, we  
 

warrant to repair the device with free parts and labor during the first six years from the date of purchase. 

2.  The registration card for the device must be sent to Piega within six weeks of purchase, or registered online via the Internet at  
 www.piega.ch/en/service/warranty.htm. 
3.  The product must be purchased from an authorized Piega dealer. 
4.  The warranty will not be applicable if any repair is carried out by a person or a workshop that is not authorized to do this by Piega. 
5.  If it is necessary for a device or part of it to be sent to Piega or an approved Piega workshop, the sender is responsible for paying all transport costs in  
 

advance. The original packaging must be used for sending the complete device. 

6.  The warranty will not be applicable if the serial number of the device has been modified, removed or made illegible. It will also not apply if the device is  
 

not connected properly or not treated with due care. The warranty will also not be applicable if the device was modified or repaired in any way that in  

 

our view has altered the correct functioning of the device. 

7.  Piega shall not be liable for the consequences of any damage. 

 

PIEGA Loudspeaker products from unauthorized dealers: 
The official PIEGA warranty becomes invalid if a PIEGA loudspeaker product was purchased from an unauthorized dealer and is therefore a gray market 
product, or if the original serial number has been intentionally removed, replaced or made illegible. Should you have any doubt that the dealer you have 
selected is an officially authorized PIEGA dealer, we recommend that you contact us or the PIEGA sales organization in your country without fail. Please 
note the PIEGA sales policy statement at www.piega.ch. Subject to modifications, in particular technical modifications and errors.                          2017 

 

PIEGA SA   Bahnhofstrasse 29   CH-8810 Horgen    [email protected]     www.piega.ch

 

Reviews: