Piega PS 1 User Manual Download Page 4

Precautions

Please read this user manual carefully and pay special attention to the following precautions and warnings. In 
your own interest, we advise you to strictly observe the following procedure when installing your new PIEGA 
subwoofer. 

Safety Precautions / Warnings:

The PIEGA subwoofers have been designed for use 
with PIEGA loudspeaker products. Nevertheless, the 
subwoofer can also be operated with the loud-
speakers of other suppliers. 

Ensure particularly that the subwoofer is installed 
and connected in accordance with the instructions of 
this user manual.

The PS 1 / PS 2 was only designed for use in dry 
residential environments within a temperature range 
of 10...40°C 

To reduce the risk of electronic shock, do not remove 
cover (or back). No user-serviceable parts inside. 
Refer servicing to qualified service personnel.

To completely disconnect this product from the 
mains, disconnect the plug from the wall socket 
outlet. When setting up this product, make sure that 
the AC outlet you are using is easily accessible.

A note about Recycling:

This product packaging materials are recyclable and 
can be reused. Please dispose of any materials in 
accordance with the local recycling regulations.
When discarding the unit, comply with local rules or 
regulations.

4

PIEGA

 PS 1 / PS 2

User Manual

Summary of Contents for PS 1















Reviews: