Piega MasterONE User Manual Download Page 5

PIEGA – Room adjustment 

 
The rocker switch provided at the back of the housing enables you to optimally adjust the MasterONE 
to the acoustics of the room it is placed in. Starting from position N = Normal, the PIEGA room 
adjustment feature allows you to adjust the level for the bass, midrange and treble. Ensure that the 
controller settings on both loudspeakers are the same. 

 
_________________________________________ 

Room adjustment

 

The three rocker switches at the back of the bass 
housing (viewed from the back) have the 
following functions: 
 
First switch on the left 

Bass range

Up

 position = Normal position 

Down 

position = Bass signal reduced. This 

position should be selected if the room tends to 
produce a “drone effect” and the sound is too 
bassy. 
 
Second switch in the middle 

Midrange: 

Up

 position = Normal position 

Middle

 position = Midrange reduced by 2dB. 

This position must be selected if the room is 
reverberant and has little damping and / or the 
listening distance to the loudspeakers is less than 
2 meters. 

Down 

position = Midrange raised by 2dB. This 

position must be selected if the room is severely 
damped. 
 
Third switch on the right 

Treble range: 

Up

 position = Normal position 

Middle

 position = Treble reduced by 2 dB. This 

position must be selected if the room is 
reverberant and has little damping and / or the 
listening distance to the loudspeakers is less than 
2 meters. 

Down 

position = Midrange raised by 2dB. This 

position must be selected if the room is severely 
dampened and the listening distance to the 
loudspeakers is less than 5 meters.

 

 

These recommended settings offer excellent 
results in most rooms. However, other settings 
that are different to these recommendations may 
be ideal depending on the acoustics of the room 
and personal taste. Test the different possibilities 
or contact PIEGA customer service for further 
questions. 
 
 
 

- 5 - 

Summary of Contents for MasterONE









Reviews: