background image

Practical Instrument Electronics

82 East Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • [email protected] • www.piecal.com

Page 1

Product Description

•   

Easy to use

With the PIECAL 211 you can check & calibrate all 

your RTD instruments and measure RTD Sensors. 

Automatic indication of connections on the display for 

simple hookups.

•   

Take it into the shop, plant or field

Carry it without worry - it comes protected with a 

rubber boot and rugged, low profile switch. Easy to 

operate even in the dark areas of the plant with the 

backlit display.

•   Calibrate directly in temperature (°C & °F)

Stop carrying around a decade box and RTD 

resistance tables. The PIECAL 211 works with the 

RTDs you use including Platinum 100 (alpha = 3850, 

3902, 3926) & 1000 (alpha = 3850, 3750) Ohm, 

Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm. 

Easily set any value quickly to within 0.1° with the 

adjustable digital potentiometer “

DIAL

” plus store any 

three temperatures for instant recall with the 

EZ-CHECK™ switch.

•   Calibrate quickly with automatic output stepping

Choose between 2, 3, 5, 11 and 21 steps to 

automatically increment the output in 100%, 50%, 

25%, 10% or 5% of span. Select the step time to 

match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 

and 60 seconds.

•   Compatible with all process instruments

Connect directly to the RTD inputs of smart 

transmitters, PLCs, DCS and multichannel recorders and verify their outputs or 

displays. Works with older instruments with fixed excitation currents and newer 

multichannel instruments that switch the excitation current between input channels.

•   Measure RTD Sensors

Trouble shoot sensor connections and find broken wires with patented technology. Connect your 

two, three or four wire RTDs and the PIECAL 211 automatically detects the connections and 

measures the RTD in degrees C or F. 

PIECAL 211

Automated Universal RTD Calibrator

 

Operating Instructions

PIECAL 211

Automated Universal RTD Calibrator

 

Operating Instructions

Copyright © 2011 All rights reserved  • 211-9002 - Rev D 13 July 2011

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for PIECAL 211









Reviews: