Page 3
Configuration
Power on & MAIN manu
Move
w
POWER SWITCH to
“SOURCE”
or
“READ”
.
Setup
Double click the
e
DIAL KNOB at any time the unit is on and the following displays will appear for
15 seconds:
Turn the
e
DIAL KNOB to move through the menu. Press the
e
DIAL KNOB to toggle between OFF
and ON or to scroll through the settings.
EXIT MENU
- exits this menu immediately and saves any changes. Menu will automatically exit after
15 seconds of inactivity (countdown timer is displayed).
FUNCTION
- pressing the knob will toggle between RTD and OHMS.
UNITS/RANGE
- pressing the knob will toggle between °C and °F for RTD or 400Ω and 2000Ω for
OHMS.
RTD
- pressing the knob will cycle through the various RTD (Pt, Cu & Ni) at different base resistances
and alpha values.
DISPLAY OHMS
- If DISPLAY OHMS is ON the resistance associated with the RTD temperature will
appear in small digits on the display.
Note:
All settings are remembered even with the power off. Removing the batteries resets the values
to factory defaults.
DOUBLE CLICK
EZ-DIAL KNOB
FOR CONFIGURATION
V#.##
MAIN
>EXIT (1/2)
FUNCTION RTD
OHMS
UNITS
°C
°F
RTD Pt 100
a
=3850
[*RTD Types - See Read RTD]
Source RTD
MAIN
>EXIT (1/2)
FUNCTION RTD
OHMS
UNITS
°C
°F
RTD Pt 100
a
=3850
Pt 1000
a
=3850, Pt 1000
a
=3750,
Pt
100
a
=3902, Pt 100
a
=3916, Pt 100
a
=3926,
Cu
10
a
=4274, Cu 50
a
=4280, Ni 120
a
=6720
Read RTD
>EXIT
(1/2)
FUNCTION OHMS
RANGE
400Ω
2000Ω
MAIN
>EXIT
(1/2)
FUNCTION
OHMS
RANGE
400Ω
2000Ω
Source Ohms
Read Ohms
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
