Page 3
Practical Instrument Electronics
Tel: 585.872.9350 • Fax: 585.872.2638 • [email protected] • www.piecal.com
Product Description
• Technician friendly operation
The unique and intuitive EZ-DIAL Double Click Menu makes it easier to
setup than other multifunction calibrators. Uses the same menus as the
single function PIE Evolution Calibrators. Icons on the display indicate where
to plug in the test leads.
•
Use it as a milliamp and voltage calibrator
Source 0 to 24.00 mA, 0 to 10.25 V & -10.00 to 80.00 mV dc
Read 0 to 24.00 mA, 0 to 10.25 V, 0 to 60.0 V and -10.00 to 80.00 mV dc
Simulate 2-Wire Transmitters & Power up transmitters & loops
• Calibrate in temperature with 0.1°C/°F resolution
Stop carrying around a millivolt source and thermocouple tables. The PIE
820PM works with the thermocouples you use including types J, T, E, K, R,
S, B, N, G, C, D, L (J-DIN), U (T-DIN) and Platinel II. Pt 100 Ohm (3850,
3902, 3916, 3926) & 100 Ohm (3850) RTD; Copper 10 & 50 Ohm, Nickel
100 and 120 Ohm RTD. Guaranteed compatible with all instrumentation.
• Quickly set any 3 outputs Plus automatic step & ramp
Easily set any value quickly with the adjustable “DIAL” plus store any three
temperatures for instant recall with the EZ-CHECK™ switch. Choose
between 2, 3, 5, 11 steps and ramp to automatically increment the output in
100%, 50%, 25%, 10% of span or continuously ramp between span and
zero. Select the step time to match your system from 5, 6, 7, 8, 9, 10, 15, 20,
25, 30 and 60 seconds.
• Compatible with all process instruments
Connect directly to the thermocouple inputs of smart transmitters, PLCs,
DCS and multichannel recorders and verify their outputs or displays.
•
Measure temperature sensors, frequency pickups, mA & V
Check the values of your process sensors. Instantly recall MAX and MIN
values to see process variability.The PIE 820PM measures thermocouple or
RTD probes in degrees C or F.
• Checkout resistance instruments, loop & wiring problems
Source and read resistance from 0.0 to 401.0 and 0 to 4010 ohms. ‘Beep’ out
connections with the built-in continuity checker.
• Checkout flow and vibration systems
Source & read frequency from 0 to 2000 CPM (Counts-Per-Minute), 0.00 to
999.99 Hz, 0.0 to 9999.9 Hz and 0.000 to 20.000 kHz.
• Easy to read
Turn on the backlight & easily see the display in dark areas of the plant.
