Picor PI2127-EVAL1 User Manual Download Page 9

Picor Corporation • 

picorpower.com

 

  PI2127-EVAL1 User Guide  

 

Rev. 1.0         

Page 

9 of 9

 

 

Warranty 

 

Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when 
in  normal  use  and  service.  This  warranty  does  not  extend  to  products  subjected  to  misuse,  accident,  or  improper 
application or maintenance. Vicor shall not be liable for collateral or consequential damage. This warranty is extended 
to the original purchaser only. 

EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR LIMITED, INCLUDING, 
BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 

Vicor  will  repair  or  replace  defective  products  in  accordance  with  its  own  best  judgment.  For  service  under  this 
warranty,  the  buyer  must  contact  Vicor  to  obtain  a  Return  Material  Authorization  (RMA)  number  and  shipping 
instructions. Products returned without prior authorization will be returned to the buyer. The buyer will pay all charges 
incurred  in  returning  the  product  to  the  factory.  Vicor  will  pay  all  reshipment  charges  if  the  product  was  defective 
within the terms of this warranty. 

Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is 
assumed for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve 
reliability, function, or design. Vicor does not assume any liability arising out of the application or use of any product or 
circuit; neither does it convey any license under its patent rights nor the rights of others. Vicor general policy does not 
recommend  the  use  of  its  components  in  life  support  applications  wherein  a  failure  or  malfunction  may  directly 
threaten life or injury. Per Vicor Terms and Conditions of Sale, the user of Vicor components in life support applications 
assumes all risks of such use and indemnifies Vicor against all damages. 

Vicor’s  comprehensive  line  of  power  solutions  includes  high  density  AC-DC  and  DC-DC  modules  and  accessory 
components, fully configurable AC-DC and DC-DC power supplies, and complete custom power systems. 

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor 
for  its  use.  Vicor  components  are  not  designed  to  be  used  in  applications,  such  as  life  support  systems,  wherein  a 
failure or malfunction could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which 
are available upon request. 

 

Specifications are subject to change without notice. 
 

 

Vicor Corporation 

Picor Corporation 

 

25 Frontage Road 

51 Industrial Drive 

 

Andover, MA 01810 

North Smithfield, RI 02896 

 

USA 

USA 

 

Customer Service: 

[email protected]

 

Technical Support

[email protected]

 

Tel: 800-735-6200 

Fax: 978-475-6715

 

 

Summary of Contents for PI2127-EVAL1











Reviews: