EFP 2005 – loudspeaking doorphone
Page
9
.
6.3 Default (recycling)
The following shall be done on Picomeds EFP 2005 when it shall be used by a new user. If
necessary, make a copy of this page, fill inn serial number, version and tick off the points
which are done with signature and date at each point, and file it as your routines requires.
Serial number:
Check the equipment. Is there any physical damages, cracks etc in box or foil?
Check that foil is not damaged, that it is fastened all around the edges and that it not has
loosened from its surface. If it is marked with former users name, remove this marking. If not
possible to remove name, replace foil (can be ordered from supplier).
Clean the device.
Ensure that all components are available, amplifier box and outdoor unit.
Make a function check.
The equipment has to be connected to an indoor unit. It is recommended to do this before the
equipment is disconnected.
Ensure that all functions are working properly: check if “ding-dong” is responding, and that it
is possible to have 2-way communication between out- and in indoor units.
Adjust potentiometer for outdoor loudspeaker volume (“GAIN”) clockwise until end-stop,
thereafter counter clockwise 90º.
Store.
6.4 Technical data
Type
Picomed EFP 2005 doorphone.
Operating
Pushbutton on outdoor unit.
The conversation is activated from indoor unit (not included).
Voice direction is electronically controlled.
Power supply
From indoor unit, 12 VDC.
Current consumption
< 250 mA.
Temperature
Amplifier box: 0˚C to +40
C.
Outdoor unit: -20˚C to +40
C.
Measurements
Amplifier box: LxWxH: 117 x 94 x 14 mm.
Outdoor unit: LxWxH: 130 x 100 x 45 mm.
Weight
Amplifier box: 160 g.
Outdoor unit: 250 g.
Programmable parameters
Outdoor volume can be adjusted by technician. It is recommended
that the preset value is kept unaltered.
Waste management
Dispose as electronic waste.
Developed and manufactured in Norway.
6.5 CE markings
Picomeds environmental control systems are developed and manufactured in accordance with
EU directives, national regulations and harmonised standards which are applicable, and
thereafter marked with the CE-mark. The Declaration of Conformity is in English version and
it is set out on the next page.
