Yellow Blinking ->
Go To ‘Updating Firmware’
Yellow and Green Solid ->
Go To ‘Waiting for WiFi information’
Green Solid ->
Go To ‘Waiting for Pico’
Green Blinking ->
Go To ‘PicoStill Ready’
I am operating my PicoStill with a Zymatic
USING PICOSTILL WITH ZYMATIC
https://www.youtube.com/watch?v=qJzYRzCHDnk#action=share
You will need:
•
Zymatic
•
Keg Adapters
•
Transfer Tube
•
5-gallon Corny Keg
•
PicoStill
•
A WiFi enabled device
Connecting PicoStill to your Zymatic
Learn how to physically connect your PicoStill to your Zymatic by watching our instructional
video above.
Connecting PicoStill to your Wi-Fi network
To use PicoStill with Zymatic you will need to start and stop PicoStill and monitor temperature
and pressure data from PicoStill’s web interface. To view PicoStill’s interface, follow the
instructions below:
1. Turn on your PicoStill. All the LED lights will blink. When they stop, you should see either
solid green OR solid green and yellow. If you see a solid green light, you can skip to step 6.
2. On a WiFi enabled device, open your Wi-Fi networks list and connect to PicoStill’s Wi-Fi
access point.
Access point name = PicoStill_XXXXXXXXXXXX Password = 12345678
