pico instruction manual
50
51
unboxing
setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
ra
ck &
carbona
te
serving
usa
ge &
care
glossary
After brewing finishes, disconnect both of the Ball
Lock Connectors from the Brewing Keg by pulling up
on the outer plastic ring of each Ball Lock Connector
and then pulling the Connector off the post.
Wipe away any foam off the Keg Seal using a damp
paper towel. Insert the Keg Seal Stopper in the center
hole of the Black Keg Seal so that the keg is airtight.
Remove the Keg Cozy from the Brewing Keg.
Note:
The Brewing Keg will be very HOT so please
be careful and only touch the keg’s black rubber
handles.
₁
Set the Brewing Keg aside to cool overnight to room
temperature. It is normal for the Keg Seal to suction
slightly into the Brewing Keg as it cools, don't worry
it will not be pulled all the way inside.
Now remove the Step Filter from the Pico and
dump the biodegradable PicoPak into a compost
bin. Remember to keep the Metal Hops Cradle and
set it aside for future brewing sessions.
₂
annie’s
pro tip:
Be carefull!
The Hops Cradle is hot
directly after brewing.
Give it chance to cool
before you touch it.
PicoPaks fit perfectly
into an 8”x8” square
baking dish. Flip the Step
Filter upside down so
the PicoPak goes into
dish upside down, use
tongs to take the metal
Hops Pak Cradle out to
reuse for future brewing
sessions. Use the dish
to carry the PicoPak to
your compost bin!
Summary of Contents for 2AJZKS1PICO
Page 1: ...craft beer your way ...
