pico Technology PicoScope 2000 Series Programmer'S Manual Download Page 38

Page: 38 / 68

API Functions

ps2000pg.en-12

PicoScope 2000 Series Programmer's Guide

5.18

ps2000_run_streaming

int16_t ps2000_run_streaming
(

int16_t    handle,
int16_t    sample_interval_ms,
int32_t    max_samples,
int16_t    windowed

)

This function tells the oscilloscope to start collecting data in

compatible streaming mode

. If this

function is called when a trigger has been enabled, the trigger settings will be ignored.

For streaming with the PicoScope 2202, 2203, 2204, 2204A, 2205 and 2205A variants, we
recommend you use

ps2000_run_streaming_ns

instead: this will allow much faster data

transfer.

Applicability

Only recommended for use with PicoScope 2104 and 2105

Arguments

handle

: the handle of the required oscilloscope

sample_interval_ms

: the time interval, in milliseconds, between data

points. This can be no shorter than 1 ms.

max_samples

: the maximum number of samples that the driver is to

store. This can be no greater than 60 000. It is the application's
responsibility to retrieve data before the oldest values are overwritten.

windowed

: if this is

only the values taken since the last call to

ps2000_get_values

are returned. If this is

, the number of values

requested by

ps2000_get_values

are returned, even if they have already

been read by

ps2000_get_values

Returns

non-zero: if streaming has been enabled correctly

: if a problem occurred or a value was out of range

Summary of Contents for PicoScope 2000 Series





































































Search results

Summary of Contents for PicoScope 2000 Series

Reviews:

Related manuals for PicoScope 2000 Series

Brands by name

Popular brands

pico Technology PicoScope 2000 Series, Programmer'S Manual

Search results

Summary of Contents for PicoScope 2000 Series

Reviews:

Related manuals for PicoScope 2000 Series

Brands by name

Popular brands