pico Technology ADC-20 User Manual Download Page 8

Page: 8 / 49

Getting started

Getting started

3.1

Installing the software

Before you connect the ADC-20 or ADC-24 to your computer for the first time, you
must install the software supplied on the CD. Insert the Software and Reference CD,
then follow the

Install Software

link.

A 32-bit

driver

is installed automatically along with the PicoLog software. Alternatively,

you can download the software development kit (SDK) from our website at

www.picotech.com

: this is available with 32-bit or 64-bit drivers.

3.2

Connecting the data logger

You must

install the software

before

plugging in the data logger. When you have

installed the software, connect the data logger's

USB

cable to a spare USB port on

your computer and wait until Windows displays the message "Device is ready to use".

3.3

Starting PicoLog

To check that the

data logger

is working, start the PicoLog application as follows:

1. Start PicoLog. (Click the PicoLog icon:

in your Windows

Start

menu).

2. Click

File

3. Point to

New settings

4. At the

Recording

dialog, click

adc20.en r6

Summary of Contents for ADC-20

















































Search results

Summary of Contents for ADC-20

Reviews:

Related manuals for ADC-20

Brands by name

Popular brands

pico Technology ADC-20, User Manual

Search results

Summary of Contents for ADC-20

Reviews:

Related manuals for ADC-20

Brands by name

Popular brands